Titanium Flanges in Bahrain

Country » Titanium Flanges in Bahrain

Titanium Flanges In Bahrain, Titanium Flanges, Titanium Flanges Supplier

Bhansali Enterprise is one of the prominent suppliers and manufacturers of titanium flanges in Bahrain and is engaged in manufacturing them. These Titanium Flanges are used widely in many industries because of their high strength, low density, and good corrosion resistance. These flanges are made of high-quality titanium material that makes them very resistant to corrosive conditions such as marine, acidic and alkaline conditions; hence, they can be used in such conditions.

One of the most noticeable features of the titanium flanges that we supply is the high degree of mechanical strength that is inherent in them, which can be exploited to the full in high pressure and high temperature conditions. This makes them suitable for applications like aerospace, chemical processing, marine and medical industries. Because of their lightweight, they have a high strength-to-weight ratio and thus can be used in areas where strength is required, but weight has to be kept to a minimum.

Quality is the most emphasized factor among all the factors considered in our production line. Titanium Flanges are produced and checked for quality at different phases to conform to the quality standards in the market. We use methods like ultrasonic testing, hardness testing, and chemical analysis to guarantee the material’s quality and performance. This is backed up with ISO accreditation to ensure the products produced are high quality per the customer’s specifications.

Besides the quality control measures we have implemented, we also offer solutions that meet the client’s requirements. If you require Titanium Flanges in standard sizes or any special sizes, we can help you with that. We have a team of competent specialists who will be ready to provide our clients with the best services in terms of procurement deliveries and support.

So, if you are searching for titanium flanges in Bahrain, you should choose us and avail yourself of the best quality, reliability, and performance. We are the right partners for your industrial applications; we have the experience and the dedication to give you the best.

Titanium Flanges Specifications in Bahrain

Standard	ASTM A182 / ASME SA182, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges
Dimension	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Flanges Size	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Pressure Class	PN 2.5 TO PN 400
Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Table	D, E, F, H
Types	Forged / Threaded / Screwed / Plate
Form	Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange.
Flanges Marking	All Flanges are marked as follows: Grade, Standard, Thickness, Heat No. (Or according to the customer’s request.)

Available Variations in Titanium Flanges in Bahrain

Titanium Flanges Equivalent Gardes in Bahrain

STANDARD	WERKSTOFF NR.	UNS
Titanium Gr 2	3.7035	R50400
Titanium Gr 5	3.7165	N56400

Chemical Composition of Titanium Flanges in Bahrain

Grade	Ti	C	Fe	H	N	O	Al	V
Ti Grade2	99.2 min	0.1 max	0.3 max	0.015 max	0.03 max	0.25 max	–	–
Ti Grade5	90 min	–	0.25 max	–	–	0.2 max	6 min	4 min

Mechanical Properties of Titanium Alloy Flanges in Bahrain

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Titanium Gr. 2	4.5 g/cm3	1665 °C (3030 °F)	Psi – 49900 , MPa – 344	Psi – 39900 , MPa – 275	20 %
Titanium Gr. 5	4.43 g/cm3	1632 °C (2970 °F)	Psi – 138000 , MPa – 950	Psi – 128000 , MPa – 880	14 %

Other Types Of Titanium Flanges in Bahrain

ASTM B381 Ti Alloy Gr 2 BLRF Flange
3.7035 Tongue & Groove Flange
ASTM B381 Titanium Grade 2 Reducing Flange
Grade 2 Titanium Flanges
ASME SB381 Titanium Gr 2 Flange
Titanium Grade 2 SORF Flange
Titanium Grade 2 WNFF Flange
Grade 2 Titanium Welding Neck Flange
Titanium Grade 2 Long Weld Neck Flanges
Titanium Alloy Gr 2 Expander Flange
Titanium Alloy Gr 2 WNRTJ Flange
WNR 3.7035 Industrial Flanges
Titanium Grade 2 Long Weld Neck Flange
Grade 2 Titanium Orifice Flange
UNS R50400 Square Flange
Grade 2 Titanium Threaded Flange
Titanium Grade 2 Lapped Joint Flange
Titanium Alloy Gr 2 Spades Ring Flanges
Titanium 3.7035 Spectacle Blind Flange
Titanium Gr 2 Lap Joint Flange
Titanium 3.7035 Pipe Flanges

Titanium Grade 2 Nipo Flanges
ASME SB381 Ti Alloy Gr 2 Puddle Flanges
Grade 2 Titanium Socket Welding Flange
ASME B16.5 Titanium Alloy Gr 2 Flanges
Grade 2 Titanium Flat Face Flange
Titanium Grade 2 Raised Face Flange
Titanium Grade 2 Plate Flange
UNS R50400 High Hub Blinds Flanges
ASME SB381 Titanium Gr 2 BLRF Flanges
Ti Alloy Gr 2 Male & Female Flanges
3.7035 Loose Flanges
UNS R50400 Spades Ring Spacers Flanges
ASME SB 381 Titanium Gr 2 Screwed Flanges
Titanium Grade 2 Flange Manufacturer in India
Titanium Gr 2 RTJF Flanges
Titanium R50400 SOFF Flanges
Titanium Gr2 Flanges
Gr 2 Titanium Alloy Flat Face Flange Stock
Titanium 3.7035 PN 10 Flange
Titanium Grade 2 Flanges Suppliers
Titanium Gr 2 Nipoflange

Titanium Alloy Flanges Industrial Application in Bahrain

Oil & Gas Industry
Power Plant Generation
Marine Industry
Petrochemical Industry
Chemical Industry
Aerospace Industry
Sugar Industry
Pharmaceutical Equipment
Pulp and Paper Industry
Gas Processing
Specialty Chemicals
Off-Shore Oil Drilling Companies

COUNTRY

CONTACT US NOW

Titanium Flanges in Bahrain